Festool Saw blade HW 160x1,8x20 W18 WOOD STANDARD
€57.02
€45.62
Save 20%
Tax included
Technical data
Diameter 160.00 mm; Cutting width 1.80 mm; Hole dia. 20.00 mm; No. of teeth 18; Chip angle 25.00 °; Tooth shape W
The circular saw blade for standard applications, ideal when the priority is speed. Carbide-tipped circular saw blade with cross-cut teeth for fast sawing action in solid wood and in chipboard. Made from high-quality steel with saw teeth made from fine-grain carbide.
Diameter 160.00 mm; Cutting width 1.80 mm; Hole dia. 20.00 mm; No. of teeth 18; Chip angle 25.00 °; Tooth shape W
The circular saw blade for standard applications, ideal when the priority is speed. Carbide-tipped circular saw blade with cross-cut teeth for fast sawing action in solid wood and in chipboard. Made from high-quality steel with saw teeth made from fine-grain carbide.
Description
Strenght and benefits
Saw teeth made of high-quality carbide – for fast sawing action and an adequate cut quality|With alternating teeth and a deep chip angle, this saw blade is suitable for both rip cuts and cross cuts|Colour coding makes it easier to select the correct saw blade|It is the ideal solution for precise, efficient work when used together with Festool TS 55 T and TSC 55 K plunge-cut saws, as well as with the HK 55 and HKC 55 – for precise, efficient work
Saw teeth made of high-quality carbide – for fast sawing action and an adequate cut quality|With alternating teeth and a deep chip angle, this saw blade is suitable for both rip cuts and cross cuts|Colour coding makes it easier to select the correct saw blade|It is the ideal solution for precise, efficient work when used together with Festool TS 55 T and TSC 55 K plunge-cut saws, as well as with the HK 55 and HKC 55 – for precise, efficient work
Quality cuts better.
Strengths and benefits
- Saw teeth made of high-quality carbide – for fast sawing action and an adequate cut quality
- With alternating teeth and a deep chip angle, this saw blade is suitable for both rip cuts and cross cuts
- Colour coding makes it easier to select the correct saw blade
- It is the ideal solution for precise, efficient work when used together with Festool TS 55 T and TSC 55 K plunge-cut saws, as well as with the HK 55 and HKC 55 – for precise, efficient work
Main areas of use
- Interior finishing
- Shell construction
- Drywalling
- Timber construction
- Machining solid wood, chipboard, cement-bonded chipboard, hardboard and plasterboard
- for TS 55 F, TSC 55 K, HK 55 and HKC 55
- for all wooden materials, solid wood, chipboard, cement-bonded chipboard, hardboard and plasterboard
in self-service display pack
Warranty all-inclusive--> Find out more