LIETUVIŲ
РУССКИЙ
ENGLISH
- -10%
Using the FS-Rapid quick-action clamp, the guide rail can be fixed to the workpiece via clamping on the side. This is done with a single hand movement. Not only is it very quick, but it also enables the rail to be clamped on workpieces for which clamps cannot be used.
Festool Quick-action clamp FS-RAPID/L
€68.98
€62.08
Save 10%
Tax included
Using the FS-Rapid quick-action clamp, the guide rail can be fixed to the workpiece via clamping on the side. This is done with a single hand movement. Not only is it very quick, but it also enables the rail to be clamped on workpieces for which clamps cannot be used.
Description
Strenght and benefits
The FS-RAPID/L quick-action clamp is specially developed for use with the SSU 200 and IS 330 sword saws thanks to the cutting angle adjustment to the left|May also be employed if no clamps can be used; for example, for thick bundles of insulating material|Time saving due to very quick fixing through just a single hand movement|No moving around the workpiece to release or tighten clamps|Soft rubber bearing points for workpiece protection and slip-resistance|Can be inserted into the clamp groove in all Festool guide rails|The clamping force of the clamping screws can be readjusted
The FS-RAPID/L quick-action clamp is specially developed for use with the SSU 200 and IS 330 sword saws thanks to the cutting angle adjustment to the left|May also be employed if no clamps can be used; for example, for thick bundles of insulating material|Time saving due to very quick fixing through just a single hand movement|No moving around the workpiece to release or tighten clamps|Soft rubber bearing points for workpiece protection and slip-resistance|Can be inserted into the clamp groove in all Festool guide rails|The clamping force of the clamping screws can be readjusted
Fixed with a single hand movement.
Strengths and benefits
- The FS-RAPID/L quick-action clamp is specially developed for use with the SSU 200 and IS 330 sword saws thanks to the cutting angle adjustment to the left
- May also be employed if no clamps can be used; for example, for thick bundles of insulating material
- Time saving due to very quick fixing through just a single hand movement
- No moving around the workpiece to release or tighten clamps
- Soft rubber bearing points for workpiece protection and slip-resistance
- Can be inserted into the clamp groove in all Festool guide rails
- The clamping force of the clamping screws can be readjusted
Main areas of use
- For quick clamping and positioning of the Festool guide rail for thick bundles of insulating material
- for FS/2
- for FS/2-KP
- for use of SSU 200, IS 330 with guide rail
- for clamping and positioning with Festool guide rails
Delivered parts
Clamping jaws, fixed jaws, in self-service display pack
Warranty all-inclusive--> Find out more
Product Details
768116
2 Items