Festool Perforated top LP-KA65 MFT/3
€225.63
€203.07
Save 10%
Tax included
Technical data
Dimensions length x width 1102 x 718.00 mm
Perforated board with cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate. For small batches, straight edges, freeform elements and gluing inclined edges, angle of 0–47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings.
Dimensions length x width 1102 x 718.00 mm
Perforated board with cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate. For small batches, straight edges, freeform elements and gluing inclined edges, angle of 0–47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings.
Description
Strenght and benefits
Perfectly prepared cut-out for the AP-KA 65 adapter plate|Sliding strip can be used flexibly due to M4 threaded sockets|Especially steady thanks to the use of a three-layer MDF panel|Can be easily replaced by the standard perforated board when MFT is present
Perfectly prepared cut-out for the AP-KA 65 adapter plate|Sliding strip can be used flexibly due to M4 threaded sockets|Especially steady thanks to the use of a three-layer MDF panel|Can be easily replaced by the standard perforated board when MFT is present
Cut-outs to perfection.
Strengths and benefits
- Perfectly prepared cut-out for the AP-KA 65 adapter plate
- Sliding strip can be used flexibly due to M4 threaded sockets
- Especially steady thanks to the use of a three-layer MDF panel
- Can be easily replaced by the standard perforated board when MFT is present
Main areas of use
- With cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the adapter plate AP-KA 65
- For small batches, straight edges, free form elements and gluing inclined edges, angle from 0-47°
- Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings
- for KA 65
- allows the user to swivel the machine (0 – 47°) in the bench in combination with the AP-KA 65 adapter plate and therefore position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects
in carton
Warranty all-inclusive--> Find out more