ACCESSORIES FESTOOL wireless, electric tools (5)

There are 1407 products.

Sort by:

Showing 121-150 of 1407 item(s)

Festool Tool chuck WH-CE CENTROTEC, KAINA BE PVM: 26.118, KODAS: 492135 | 001

-10%

Festool Tool chuck WH-CE CENTROTEC

€36.20 -10% €32.58

The CENTROTEC tool chuck enables the use of drilling and screwdriving accessories with a CENTROTEC interface. Use is very intuitive – simply put it on the FastFix support of the drill, insert the appropriate accessories and get started immediately. In addition to the enormous savings in terms of space and weight, the tool chuck impresses due to...

Festool Twist drill bit HSS D 8,0/75 CE/M-Set, KAINA BE PVM: 23.139, KODAS: 495308 | 001

-10%

Festool Twist drill bit HSS D 8,0/75 CE/M-Set

€32.08 -10% €28.87

Technical data Diameter 8.00 mm CENTROTEC HSS drill with replaceable drill bit. The HSS spiral wood drill bits are suitable for machining steel and non-ferrous metals. The drill bit can be quite easily replaced if necessary with a hex key.

Festool Twist drill bit HSS D 6/57 CE/M-Set, KAINA BE PVM: 15.624, KODAS: 493427 | 001

-10%

Festool Twist drill bit HSS D 6/57 CE/M-Set

€21.66 -10% €19.49

Technical data Diameter 6.00 mm CENTROTEC HSS drill with replaceable drill bit. The HSS spiral wood drill bits are suitable for machining steel and non-ferrous metals. The drill bit can be quite easily replaced if necessary with a hex key.

Festool Twist drill bit HSS D 5/52 CE/M-Set, KAINA BE PVM: 14.805, KODAS: 493425 | 001

-10%

Festool Twist drill bit HSS D 5/52 CE/M-Set

€20.52 -10% €18.47

Technical data Diameter 5.00 mm CENTROTEC HSS drill with replaceable drill bit. The HSS spiral wood drill bits are suitable for machining steel and non-ferrous metals. The drill bit can be quite easily replaced if necessary with a hex key.

Festool Twist drill bit HSS D 5,5/57 CE/M-Set, KAINA BE PVM: 15.012, KODAS: 493426 | 001

-10%

Festool Twist drill bit HSS D 5,5/57 CE/M-Set

€20.81 -10% €18.73

Technical data Diameter 5.50 mm CENTROTEC HSS drill with replaceable drill bit. The HSS spiral wood drill bits are suitable for machining steel and non-ferrous metals. The drill bit can be quite easily replaced if necessary with a hex key.

Festool Twist drill bit HSS D 4/43 CE/M-Set, KAINA BE PVM: 13.473, KODAS: 493423 | 001

-10%

Festool Twist drill bit HSS D 4/43 CE/M-Set

€18.67 -10% €16.80

Technical data Diameter 4.00 mm CENTROTEC HSS drill with replaceable drill bit. The HSS spiral wood drill bits are suitable for machining steel and non-ferrous metals. The drill bit can be quite easily replaced if necessary with a hex key.

Festool Twist drill bit HSS D 3/33 CE/M-Set, KAINA BE PVM: 12.24, KODAS: 493421 | 001

-10%

Festool Twist drill bit HSS D 3/33 CE/M-Set

€16.96 -10% €15.26

Technical data Diameter 3.00 mm CENTROTEC HSS drill with replaceable drill bit. The HSS spiral wood drill bits are suitable for machining steel and non-ferrous metals. The drill bit can be quite easily replaced if necessary with a hex key.

Festool Deburring countersink QLS D 5-15 CE, KAINA BE PVM: 40.41, KODAS: 492521 | 001

-10%

Festool Deburring countersink QLS D 5-15 CE

€56.01 -10% €50.41

Technical data Diameter 5.00 - 15.00 mm The deburring countersink is used for pre-counterboring with flush screw fittings. The transverse hole drilling leads to a burr-free, clean result with smooth operation.

Festool Deburring countersink QLS D 2- 8 CE, KAINA BE PVM: 32.904, KODAS: 492520 | 001

-10%

Festool Deburring countersink QLS D 2- 8 CE

€45.60 -10% €41.04

Technical data Diameter 2.00 - 8.00 mm The deburring countersink is used for pre-counterboring with flush screw fittings. The transverse hole drilling leads to a burr-free, clean result with smooth operation.

Festool Battery pack BP-XS 2.6 Ah Li-Ion, KAINA BE PVM: 65.493, KODAS: 500184 | 001

-10%

Festool Battery pack BP-XS 2.6 Ah Li-Ion

€90.79 -10% €81.71

Technical data Tensioner 10.80 V; Capacity 2.6 Ah; Product weight 0.20 kg Specially developed for the CXS and TXS cordless drills: The battery pack of just 200 g in weight makes the CXS and TXS especially light and manageable and ensures optimal weight distribution. At 10.8 V and 2.6 Ah, ideal for typical assembly applications – for working...

Festool Battery pack BPC 15 5,2 Ah-Li Ion, KAINA BE PVM: 93.222, KODAS: 500434 | 001

-10%

Festool Battery pack BPC 15 5,2 Ah-Li Ion

€129.22 -10% €116.30

Technical data Tensioner 14.40 V; Capacity 5.2 Ah; Product weight 0.58 kg The replacement battery for the use of T 15+3, C 15 Li and TI 15 IMPACT cordless drills and the PSC/PSBC 420 pendulum stroke jigsaws. The easy attachment to the machine enables fast continued work.

Festool Battery pack BPC 12 Li 4,2 Ah, KAINA BE PVM: 90.792, KODAS: 205238 | 001

-10%

Festool Battery pack BPC 12 Li 4,2 Ah

€125.85 -10% €113.26

Technical data Tensioner 10.80 V; Capacity 4.2 Ah; Product weight 0.49 kg The replacement battery for T 12+3 and C 12 Li cordless drills with even more power and longer operating time. Thanks to the availability of spare parts for at least ten years, the battery pack continues to enhance the Festool range.

Festool Drywall screws DWS C CT 3,9x35 1000x, KAINA BE PVM: 35.271, KODAS: 769144 | 001

-10%

Festool Drywall screws DWS C CT 3,9x35 1000x

€48.88 -10% €43.99

Technical data Diameter 3.90 mm; Length 35.00 mm The drywall screws loaded in a magazine are suitable for time-saving screwing of plasterboard panels with magazine drywall screwdrivers, for example. The phosphated screws are protected against corrosion and can be skimmed.

Festool V-groove cutter HW 118x14-90°/Alu, KAINA BE PVM: 397.62, KODAS: 491470 | 001

-10%

Festool V-groove cutter HW 118x14-90°/Alu

€551.16 -10% €496.04

Technical data D 118.00 mm; Alpha 90.00 °

Festool Roundover cutter with reversible blades S8 HW R2 D28 KL12,7 MFK, KAINA BE PVM: 134.181, KODAS: 499809 | 001

-10%

Festool Roundover cutter with reversible blades S8 HW R2 D28 KL12,7 MFK

€185.99 -10% €167.39

Technical data s 8 mm; D 28.00 mm; NL 3.00 mm; GL 55.00 mm; R 2.00 mm Flush trimming and rounding off in a single step is possible with this cutter. Should the blades get blunt at some point, the reversible blades are turned easily – and a sharp tool is available again immediately.

Festool Roundover cutter with reversible blades S8 HW R1 D28 KL12,7 MFK, KAINA BE PVM: 134.181, KODAS: 499811 | 001

-10%

Festool Roundover cutter with reversible blades S8 HW R1 D28 KL12,7 MFK

€185.99 -10% €167.39

Technical data s 8 mm; D 28.00 mm; NL 3.00 mm; GL 55.00 mm; R 1.00 mm Flush trimming and rounding off in a single step is possible with this cutter. Should the blades get blunt at some point, the reversible blades are turned easily – and a sharp tool is available again immediately.

Festool Roundover cutter HW S8 D31,7/R9,5 KL, KAINA BE PVM: 63.855, KODAS: 491015 | 001

-10%

Festool Roundover cutter HW S8 D31,7/R9,5 KL

€88.51 -10% €79.66

Technical data s 8 mm; R 9.50 mm; D 31.70 mm; NL 16.50 mm; GL 56.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.

Festool Roundover cutter HW S8 D16,7/R2 KL, KAINA BE PVM: 55.827, KODAS: 491009 | 001

-10%

Festool Roundover cutter HW S8 D16,7/R2 KL

€77.38 -10% €69.64

Technical data s 8 mm; R 2.00 mm; D 16.70 mm; NL 9.00 mm; GL 49.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.

Festool Roundover cutter HW R4-OFK 500, KAINA BE PVM: 70.128, KODAS: 490094 | 001

-10%

Festool Roundover cutter HW R4-OFK 500

€97.21 -10% €87.49

Technical data D 27.00 mm; R 4.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

Festool Roundover cutter HW R3-OFK 500, KAINA BE PVM: 64.674, KODAS: 490093 | 001

-10%

Festool Roundover cutter HW R3-OFK 500

€89.65 -10% €80.69

Technical data D 27.00 mm; R 3.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

Festool Roundover cutter HW R2-OFK 500, KAINA BE PVM: 64.674, KODAS: 490092 | 001

-10%

Festool Roundover cutter HW R2-OFK 500

€89.65 -10% €80.69

Technical data D 27.00 mm; R 2.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

Festool Spiral groove cutter HW Spi S8 D4/10, KAINA BE PVM: 51.822, KODAS: 490977 | 001

-10%

Festool Spiral groove cutter HW Spi S8 D4/10

€71.83 -10% €64.65

Technical data s 8 mm; D 4.00 mm; NL 10.00 mm; GL 45.00 mm Thanks to the solid carbide, the cutter can be used for a multitude of materials. Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates.

Festool Spiral groove cutter HS Spi S8 D12/20, KAINA BE PVM: 25.191, KODAS: 490947 | 001

-10%

Festool Spiral groove cutter HS Spi S8 D12/20

€34.92 -10% €31.43

Technical data s 8 mm; D 12.00 mm; NL 20.00 mm; GL 52.00 mm Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates. Thanks to the high-performance cutting steel, it is suitable above all for solid wood.

Festool Chamfer cutter HW 45°-OFK 500, KAINA BE PVM: 57.888, KODAS: 490090 | 001

-10%

Festool Chamfer cutter HW 45°-OFK 500

€80.24 -10% €72.22

Technical data D 27.00 mm; Alpha 45.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

Festool Chamfer cutter HW 30°-OFK 500, KAINA BE PVM: 57.888, KODAS: 490091 | 001

-10%

Festool Chamfer cutter HW 30°-OFK 500

€80.24 -10% €72.22

Technical data D 27.00 mm; Alpha 30.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

Festool Chamfer cutter HW 60°-OFK 500, KAINA BE PVM: 57.888, KODAS: 491533 | 001

-10%

Festool Chamfer cutter HW 60°-OFK 500

€80.24 -10% €72.22

Technical data D 27.00 mm; Alpha 60.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

Festool Dovetail cutter HW S8 D20/17/15°, KAINA BE PVM: 45.558, KODAS: 490996 | 001

-10%

Festool Dovetail cutter HW S8 D20/17/15°

€63.15 -10% €56.84

Technical data s 8 mm; D 20.00 mm; NL 17.00 mm; GL 49.00 mm; Alpha 15.00 ° Dovetail cutter for producing an open dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 20 template.

Festool Dovetail cutter HS S8 D13,8/13,5/15°, KAINA BE PVM: 23.031, KODAS: 490991 | 001

-10%

Festool Dovetail cutter HS S8 D13,8/13,5/15°

€31.92 -10% €28.73

Technical data s 8 mm; D 13.80 mm; NL 13.50 mm; GL 46.00 mm; Alpha 15.00 ° Dovetail cutter for producing a semi-covered dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 14 template.

Festool Drilling cutter HW S8 D8/19, KAINA BE PVM: 29.205, KODAS: 491037 | 001

-10%

Festool Drilling cutter HW S8 D8/19

€40.49 -10% €36.44

Technical data s 8 mm; D 8.00 mm; NL 19.00 mm; GL 65.00 mm This drilling cutter is perfectly suited to contours and cut-outs in wood or panel materials, which are subsequently covered with laminate.

Festool Through-hole drill HW S8 D5/30, KAINA BE PVM: 31.266, KODAS: 491064 | 001

-10%

Festool Through-hole drill HW S8 D5/30

€43.34 -10% €39.01

Technical data s 8 mm; D 5.00 mm; NL 30.00 mm; GL 53.50 mm Festool cutters are produced from first-class steel and wear-resistant carbide. This allows high stability and run-out accuracy, precise contours and a long service life. The high-strength hard solderings of the carbide blades ensure risk-free and impeccable working.

Showing 121-150 of 1407 item(s)

Previous
1
…
4
5
6
…
47
Next